Filter
Top Products
7
(Figure 4)
NOTE: If you do not have a standard modular wall jack, find a qualified technician to mount
one on the wall.
B. WALL MOUNTING (No Standard Wall Jack)
1. Drill two holes with a vertical distance between the two
marked positions of 3
15/16
" (100 mm) as shown in Figure 5.
2. Drive a screw into each of the holes. Tighten them to the
end of the screw line, only leaving the smooth part of the
screw head outside the wall.
3. Hang the unit onto the screws, and then slide it down firmly to
fasten the base securely.
BASE RETAINER TAB
If the base unit is to be placed in the wall mount position, the base retainer tab allows the
handset to hang onto the base unit.
3
15/16
”
(100 mm)
(Figure 5)
(Figure 6)
BELT CLIP INSTRUCTION
Clamp the belt clip at the back of the handset as shown in Figure 7.
(Figure 7)
Retainer Tab
Wall Mounting
Bracket
Base Unit
(Side View)
Studs
Telephone Modular
Wall Jack
Wall Mount
Slots
Belt Clip