Filter
Top Products
30
Using The Conference Feature
The “Conference” key is used to establish a 3-
way conversation. The conference feature is
activated by a “soft” key that will automatically
reset when hanging up.
A 3-way “Conference” call can be established
while using either the handset or Speakerphone.
To use the “Conference” feature:
1. Place the line that is currently in-use on
hold by pressing the “Hold” key. The line
status indicator will turn from Green to
RED.
2. The second caller can be established by
selecting the idle line key to obtain dial tone
for out bound dialing.
3. When the second call is established,
activate the 3-way conference call by
pressing the “Conference” key.
Line 1 and Line 2 will automatically
“bridge” together and all the three
parties can now converse.
4. To end the call, simply hang-up by
replacing the handset back to its cradle
(on-hook) or by pressing the “Speaker” key.
Both callers will drop-off and both
lines will hang-up. The 2802CID is now
back to its on-hook, idle state.
5. If you wish to continue speaking with one
of the callers and wish to “drop” the
other caller, simply press the line key of
the caller you wish to continue speaking
with. The other caller will automatically
drop-off.