Filter
Top Products
14
Connecting The Handset Cord
A 10’ modular coil handset cord is provided. To
install, simply plug one end of the handset cord
into the modular jack on the handset. The
remaining end of the handset cord plugs into the
jack labeled “Handset” located on the left side of
the 2802CID base unit.
Installation Diagram
Installation Is Completed
The installation diagram shown, is the final
installation configuration for the 2802CID
telephone. If the installation is correct, the
following information will be displayed on
the LCD (after off-hook):
DATE TIME
12/01 PM 12:00
12 - 01 12 - 00
INSTALLATION