Filter
Top Products
Turning On/Off the Speakerphone
Turning On: Speakerphone is in Off mode:
Press and hold the Power button for about 5 seconds until LCD lights up and shows “checking SIM” in
the display. When there’s no SIM Card in the Speakerphone, the LCD will show “no SIM” and
“BT-HFKP30” will show up in the display. The unit will beep twice and LED will flash every second.
Notes:
1. If the Speakerphone has not been paired with a Bluetooth device, “BLUETOOTH” will eventually
appear in the display. See “Pairing to a Mobile Handset” for more information.
2. If the Speakerphone has been paired with a Bluetooth device, the Speakerphone will search for the
last paired Bluetooth device and “Connecting” will appear in the display. When a connection is com-
plete, the unit will go into standby mode and the LED will flash every 5 seconds.
Example: If the last paired Bluetooth device is Samsung SGH-A517 handset. The Speakerphone will
search for NOK SGH-A517 handset; when the device is connected, the LCD display show the following:
Operation Instructions
1
Handset Identification Number
Speakerphone Paired
with Handset
Battery Power
Indicator
Turning Off:
Press and hold the Power button for about 5 seconds until you hear 2 long beeps from the speaker.
The LCD screen will display “Power Off” and speakerphone will be powered off in 2 seconds.
Pairing to a Mobile Handset
Prior to using the Speakerphone for the first time, you must pair it with a Bluetooth-enabled mobile
handset. The following steps describe pairing instruction for a typical Bluetooth-enabled mobile handset.
1. Place the Speakerphone and mobile handset no more than 3 feet apart.
2. Ensure the Speakerphone is in the Off mode.
3. Press and hold the Power button for 5 seconds until you hear a long beep. The LED will flash blue
every second and "Connecting" will appear in the LCD. After a few seconds, the Speakerphone will
return to standby. It’s now ready for pairing.
4. Activate your mobile handset’s Bluetooth accessing function by referring to your mobile handset
user guide for details. Meanwhile, the handset will search for accessible Bluetooth devices.
5. Select “BT-HFKP30” from the list.
6. Enter the pre-programmed passkey “0000” and press “OK” to pair the Speakerphone and the
handset. When pairing is complete, you may hear a long beep and LED will flash blue 3 times.
The Speakerphone has returned to standby mode when LED flashes blue every 3 seconds.
7. Press “Ok” to go back to your handset’s main menu. (For most mobile handset models, a headset
icon or some other connection icon will be shown on the screen.) You should now be able to
make and receive calls through the Speakerphone. Use the mobile handset no more than 30 feet
away from the Speakerphone . (Obstruction could cause shorter sensing distance.)
IMPORTANT: If the pairing cannot be completed within 2 minutes, the Speakerphone will return to
standby mode and the blue LED will flash every 5 seconds. Please repeat steps (2) to (7) to pair the
Speakerphone and mobile handset again.
6