Magnadyne BT-HFKP30 Conference Phone User Manual


 
Care and Maintenance
• Turn off when not in use.
• Do not expose the Speakerphone to liquid, moisture or humidity. It is not waterproof.
• Do not use abrasive cleaning solvents to clean the Speakerphone.
• Do not expose the Speakerphone to high temperatures.
• Do not attempt to disassemble the Speakerphone. It does not contain serviceable components.
• If you do not use the Speakerphone for long periods, store it in a dry place, free from extreme
temperature, humidity and dust.
• Only use the MobileVision supplied charger when charging the Speakerphone.
• Only charge the Speakerphone’s built-in battery in accordance with the instructions of this user guide.
• Avoid charging the Speakerphone in extremely high or low temperatures.
• Do not use charger outdoors or in damp areas.
• Do not disassemble the charger.
• Do not expose the Speakerphone to sharp objects which may cause scratching or other damage.
• Do not stick anything inside the Speakerphone which may cause damage to its internal components.
Trouble Shooting
Ensure the Speakerphone is paired with your mobile handset.
Ensure your mobile handset's Bluetooth feature is activated.
Please refer to your mobile handset user guide for specific instructions.
Ensure the Speakerphone is within a maximum of 30 feet of your mobile
handset(s) and there are no obstructions, such as walls or other
electrical devices in between as it may cause shorten or interfere
with transmission.
If all the above steps do not resolve your problem, remove the battery
for 10 minutes.
If you are unable to con-
nect your Speakerphone
and mobile handset, try
the following:
The Bluetooth Speakerphone is compliant with and adopts the Bluetooth Specification V1.2. However,
interoperability between the device and other Bluetooth-enable products is not guaranteed because it
depends on compatibility. For more information on the compatibility between the device with other
Bluetooth-enabled products, please check with the manufacturer/importer.
10