Filter
Top Products
3
NOTE: If you do not see this message once you have entered Programming mode,
your telephone is probably NOT connected to a Release 6.3 switch. For help,
contact your system manager.
2. Select the hardkey (feature button) you want to program. (To do this, press
the button.)
3.
You will see the message
Enter number:
on the display.
Enter the number
you want that button to call. See the “Helpful Hints” section below for
information on the numbers you can enter.
When you have finished entering the number, press the “
#” key.
You will hear the confirmation tone (three beeps), and you will see the
message
Number Saved
for one second and then the message
Press but-
ton to program.
If you want to program another button, go back to Step 2; otherwise,
continue with Step 4.
NOTE: When you have changed the number called by a hardkey, you may
want to change its label on the paper strip too.
4. To exit from Programming mode, hang up your telephone. (To do this, press
the Speaker button, or lift the handset and then put it back.)
NOTE: Pressing the Exit button does not exit you from Programming mode.
Helpful Hints
• If the number you are entering for an Abbreviated Dialing button is an out-
side number, be sure to include any applicable trunk codes, for example,
a “9.”
• Numbers programmed on softkeys may be up to 24 digits in length;
numbers programmed on hardkeys (feature buttons) may be up to
16 digits if the hardkey will be used as an auto-dial button or up to
24 digits if associated with a list. If you need help. see your system
manager.
• Special functions such as Pause, Mark, and Wait, may be available on
your softkey menu; if so, they can be inserted in the numbers you
program. These functions may be accessed during programming by
pressing the Menu button.
• You can enter feature access codes on Abbreviated Dialing buttons
instead of telephone numbers so that the button initiates a feature rather
than placing a call.
Prepared by Copyright © 1999
BCS Product Publications Lucent Technologies
Middletown, NJ 07748-1998 Printed in USA