Filter
Top Products
8
2. Press , then the dial pad key you wish to program. [dial tone]
For example, to store a number in AD entry F3, press , then
the dial pad key.
3. Dial the outside number, extension, or feature access code you want to
store (up to 24 digits).
4. Press . [confirmation tone, then dial tone]
5. Repeat Steps 2 through 4 to program additional buttons.
6. Hang up to end programming.
To place an AD call from your Feature Directory
1. While off-hook, press , then the dial pad key which
corresponds with the AD number you wish to call. [ringback tone]
For example, to call the number stored as AD entry F3, press ,
then press the dial pad key.
To program or reprogram a Personal List item
1. On a separate sheet of paper, write down the outside numbers,
extensions, and/or feature access codes you want to program as items
on your Personal List(s).
2. While off-hook, dial the Abbreviated Dialing Program access code.
[dial tone]
3. Dial the Personal List number (1, 2, or 3).. [dial tone]
4. Dial the list item (1, 2, 3...). (See your system manager for the number
of Personal List items you can program.) [dial tone]
5. Dial the number you want to store (up to 24 digits).
6. Press . [confirmation tone, then dial tone]
Number is stored.
7. Repeat Steps 4 through 6 if you want to program additional items on
the same list. Hang up and begin again at Step 2 if you want to
program items on another personal list.
8. Hang up.
9. Record your personal list items on the Abbreviated Dialing list on the
appropriate card in the tray under the base of the telephone.
To place a call using an AD list button or code
1. Press , then the appropriate dial pad key on which a list access
code is administered.
OR, dial the appropriate AD List code:
List 1 __________
List 2 __________
List 3 __________
Feature
Feature
3
#
Feature
Feature
3
#
Feature
230738i3.book Page 8 Thursday, July 8, 1999 3:40 PM