Filter
Top Products
5
8 Local Programming Functions (Continued)
Function 31: Enter Entry Codes
Entry Codes can be added using this function. In AccessBase2000
system, Entry Codes may have variable length from one to eight digits.
However, in Local Programming mode, the length of Entry Code is fi xed
at four digits.
Function 33: Delete Entry Codes
Entry codes can be deleted from the Controller using this function.
Function 41: Enter Cards & Transmitters
This function enters block coded cards or transmitters only. The Start ID
and the End ID cannot be the same. Each block must have a minimum
of two cards or transmitters.
The length of the block’s start and stop ID number allowed depends on
the programming software used. AccessBase2000 allows a maximum
of 13 digits up to 1099511627775. AXNET allows a maximum of 5 digits
up to 65535. All cards and transmitters are active when entered in local
programming.
Function 42: Reactivate/Deactivate
Card or Transmitter
The cards and transmitters may be deactivated or reactivated using this
function. The cards and transmitters are active when allocated.
Function 43: Delete Card or Transmitter Block
Card and transmitter blocks can be deleted from the Controller using this
function. The function will remove an entire block from the Controller.
FCN 31
31#CODE#CODE#
CODE = THE FOUR-DIGIT ENTRY CODE TO ADD
ENTER ENTRY CODES
FCN 33
33#CODE#CODE#
CODE = THE ENTRY CODE TO DELETE
DELETE ENTRY CODES
FCN 41
TYPE = 1 FOR CARDS; 2 FOR TRANSMITTERS
BLOCK = BLOCK NUMBER (# TO ACCEPT OR CHANGE)
FC = FACILITY CODE (CARDS 1-255; TRANSMITTERS 0-15)
SID = STARTING BLOCK ID NUMBER
EID = ENDING BLOCK ID NUMBER
ENTER CARDS AND TRANSMITTERS
41#TYPE#BLOCK#FC#SID#EID#
FCN 42
TYPE = 1 FOR CARDS; 2 FOR TRANSMITTERS
FC = FACILITY CODE (CARDS 1-255; TRANSMITTERS 0-15)
ID = ID NUMBER OF CARD OR TRANSMITTER
ACTION = 0 TO DEACTIVATE; 1 TO ACTIVATE
REACTIVATE OR DEACTIVATE CARD OR TRANSMITTER
42#TYPE#FC#ID#ACTION#
FCN 43
43#TYPE#BLOCK#
TYPE = 1 FOR CARDS; 2 FOR TRANSMITTERS
BLOCK = BLOCK NUMBER 1-24
DELETE CARD OR TRANSMITTER BLOCK