Filter
Top Products
LIP-6812 User Guide
5
2.4. Putting a Call on Hold
You can place a call in a waiting state, allowing you freedom from the call and providing the
held party with MOH (Music-on-Hold).
To place a call on Hold:
1) Put a call on hold by pressing [Hold] Soft key.
To retrieve a held call:
1) To return to the current call, press the blinking line button or press [Hold] Soft key.
2.5. Transferring Calls
You can send an active call to another extension and either announce the call or hang-up to
complete the transfer:
To transfer an active call:
1) Press [TRNS] Soft key.
2) Dial the number you wish to transfer. You can hang up (unannounced transfer) or, wait until
the party answers and announce the call transfer.
3) Hang up to complete the transfer.
2.6. Using Conferencing
The Conferencing feature lets you add up to three other parties to an existing call creating a
four-way conference. Conferencing is a super set of the transfer feature and works in a similar
manner.
To initiate a conference between the current party, you, and another party:
1) Press [CONF] Soft key.
2) Dial the number you want to join in the conference.
3) When the party answers, press [JOIN] Soft key to establish the conference.
Notes:
If you get a busy tone or no answer at the called party, press [CNCL] Soft key to return to
the original party.
2.7. Parking a Call
The Call Park feature lets you place a call on hold so another user can pick up the call. Call
Park is often used with paging systems to announce the call, then the desired user can dial the
park location to access the call.
To Park an active call:
1) Press the Right direction button , the Next Menu is displayed.
2) Press [Park] Soft key. Your current extension number is shown as the default park
destination.
3) Press [ OK ] Soft key.
4) Hang-up to complete the Call Park.