Filter
Top Products
LIP-6812 User Guide
6
To change the Park location to another extension:
1) ~ 2) Refer to the above steps.
3) Press [CHNG] Soft key.
4) Dial the new destination extension number followed by .
5) Hang-up to complete the Call Park.
To exit the Call Park Menu:
1) ~ 2) Refer to the above steps.
3) Press [CNCL] Soft key, to exit the Call Park Menu.
Notes:
While parked, the parked party hears MOH (Music-on-Hold).
If a call is parked and not picked up within the time out, the call will ring-back to the parking
user.
Calls may only be parked to other internal extensions.
Only one call can be parked at an internal extension.
2.8. Picking Up a Call
When a call is ‘Parked’ at an extension you are not near, you may access the call from the
nearest extension using the Call Pickup feature.
To Pick-up a parked call:
1) Press [Pick] Soft key.
2) Dial the parked extension number followed by .
2.9. DND (Do-Not-Disturb)
The DND (Do Not Disturb) feature places the LIP-6812 in a ‘no-ring’ state. If the LIP-6812 is in
DND, an incoming call to your extension will not cause the phone to ring. In the User portal, the
DND function must be assigned to a flexible button.
To activate DND:
1) Press the DND Flexible button. When activated, the button LED will light red.
To deactivate DND:
1) Press the illuminated DND Flexible button again.
2.10. Muting a Call
The Mute feature lets you turn-off the handset, headset, or speakerphone microphone. This
prevents the connected party from hearing what is said in the vicinity of the handset, headset, or
speakerphone microphone.
To mute the microphone:
1) Press to mute a call. When mute is activated, the button LED is illuminated red.
To activate the handset, headset, or speakerphone microphone:
1) Press again or lift the handset to deactivate mute.