Filter
Top Products
Monitor settings
67
5
Monitor settings
MENU Supported Input Description
PICTURE BRIGHTNESS HDMI (Digital signal input.)
D-SUB (Analog signal input.)
You can adjust the level of the Brightness. The lower the level,
the softer the image.
CONTRAST You can adjust the level of the Contrast. Increases or decreases
the gradient of the video signal.
SHARPNESS You can adjust the level of the Sharpness..
BLACK LEVEL HDMI (Digital signal input.) Sets black level of the screen to proper level. This function is
available in the HDMI mode only.
• LOW: The reection of the screen gets darker.
• HIGH: The reection of the screen gets brighter.
COLOR COLOR TEMP HDMI (Digital signal input.)
D-SUB (Analog signal input.)
Select PRESET or USER option to set the value.
PRESET Select the screen color.
• sRGB: Set the screen color to t the sRGB standard color
specication.
• 6500K: Slightly reddish white.
• 7500K/8500K: Set the screen color to default value.
• 9300K: Slightly bluish white.
RED This option is activated when you select the [COLOR TEMP]
option to [USER]. Set your own red color levels.
GREEN This option is activated when you select the [COLOR TEMP]
option to [USER]. Set your own green color levels
BLUE This option is activated when you select the [COLOR TEMP]
option to [USER]. Set your own blue color levels.
GAMMA Set your own gamma value. : GAMMA0 / GAMMA1 / GAMMA2
On the monitor, high gamma values display whitish images
and low gamma values display blackish images.
DISPLAY HORIZONTAL D-SUB (Analog signal input.) To move image left and right.
VERTICAL To move image up and down.
CLOCK To minimize any vertical bars or stripes visible on the screen
background.
The horizontal screen size will also change.
PHASE To adjust the focus of the display.
This item allows you to remove any horizontal noise and clear
or sharpen the image of characters.
OVERSCAN HDMI (Digital signal input.) If you set to [ON], the overscan function is activated.
This function is available in the HDMI mode only.
VOLUME - HDMI (Digital signal input.)
D-SUB (Analog signal input.)
Use the MODE or AUTO button to adjust the output volume.
If you press INPUT again, the system volume is muted.