LG Electronics 20W Telephone User Manual


 
aria 20 SERIES DIGITAL KEY TELEPHONE SYSTEM USER GUIDE:
aria 20A, aria 20, aria 20W
8
Placing an Outside Call
Lift handset or press MON button.
Press outside line button, pool button or dial CO line access
code.
Dial desired party.
When called party answers, lift handset or use speakerphone.
1 OR: 4 + (1 ~ 4)
OR: 48 +
20/16 :( 1 ~ 6)
20W :( 1 ~ 8 )
Button Procedures
Range
Answering an Outside Call
Button Procedures
Range
Lift handset or press MON button to use speakerphone.
Press flashing CO line button or loop key. (NB: If the Preferred Line Answer feature
is ON for your station, you may answer just by lifting handset, or press MON.)
Call Transfer
Button Procedures
To transfer an outside call to the other extension,
Press TRANS/PGM button. (The outside call is put on hold.)
Dial station number
or appropriate DSS button.
You can make a screened or unscreened transfer.
When the called extension answers, introduce the call hang up to complete call transfer.
While the station you called rings, hang up to complete call transfer.
To answer screened transfer,
When a station rings according to Intercom Answer Mode selection, answer the
intercom call.
The transferring party hangs up, the call will be connected.
Range
16 : 700 ~ 715
20 : 700 ~ 720
20W: 700 ~ 730
Screened
Transfer
Unscreened
Transfer
CO Line Features
Last Number Redial
The last dialed number on an outside line is saved.
To redial the last dialed number,
Press REDIAL button. Or,
Press SPEED + *.
Button Procedures
Range
Button Procedures
Range
Press REDIAL button.
Hang up.
A busy or no answer number will be redialed automatically after
pre-programmed time interval while MUTE button is lighting.
When called party answers, lift handset to talk.
When the called party is busy or does not answer the call, the system can automatically redial the number by pre-programmed
time interval.
Auto Call Number Redial
Available by
Software:
16: Above V4.0
20W: Above V3.0
20: All
Button Procedures
Lift handset or press MON button.
Press flashing CO line button. If a CO line button is not assigned, dial 69.
You will be connected to ringing outside line.
Range
Universal Night Answer
When CO lines are programmed for UNA and the system is placed into night mode, users can answer incoming CO line
calls employing dial code regardless of pick-up group.