LG Electronics 20W Telephone User Manual


 
aria 20 SERIES DIGITAL KEY TELEPHONE SYSTEM USER GUIDE:
aria 20A, aria 20, aria 20W
17
Wake-up Call
To register wake-up call,
Press TRANS/PGM button.
Dial 4 1
Enter the station range (XXX-YYY) to receive wake-up call.
After hearing confirmation tone, enter 4-digit wake-up time (HHmm) in 24-hour mode. (HH= 00~23, mm= 00~59)
Press HOLD/SAVE button for one-day, or dial # and HOLD/SAVE button for until canceled.
Button Procedures
Attendant Operation
To cancel wake-up call,
Press TRANS/PGM button.
Dial 4 2 . (Confirmation tone is heard and MON button is lighting.)
Dial the station range to be canceled.
Press HOLD/SAVE button. (MON button will be extinguished.)
System Greetings
Button Procedures
It provides announcements for Hunt service (UCD/Circular/Terminal) or DISA and only the system attendant can
record this message.
Press TRANS/PGM button.
Dial # 4.
Select the announcement type. (1: System Greeting, 2: System Prompt)
Dial the announcement number.
Dial the source number (1: external MOH, 2: DKTU)
Dial # to start recording.
Press HOLD/SAVE button.
You have 19 System Greetings and 9 Prompts;
System Greetings (Announcement Type 1)
1: Day Time System Greeting
2 : Night Time System Greeting
3 : Circular & Terminal Hunt Group Greeting
4 : 1st UCD Group Announcement
5 : 2nd UCD Group Announcement
6 : Ring Group Announcement (GDK-16: version 4.0XX, 20W: version 3.0XX)
7 : DVIB MOH
8 : SLT Message Waiting Indication Announcement (GDK-16: version 4.0XX, 20W: version 3.0XX)
9 : Off-Net Forward Announcement (GDK-16: version 4.0XX, 20W: version 3.0XX)
10 : Group Overflow Announcement (GDK-16: version 4.0XX, 20W: version 3.0XX)
11-19: CCR Announcement (GDK-16: version 4.0XX, 20W: version 3.0XX)
System Prompts (Announcement Type 2)
1: Timeout Prompt 6 : No Answer Prompt
2 : Retry Prompt 7 : Transfer to Attendant Prompt
3 : Busy Prompt 8 : Authorization Code Prompt
4 : DND Prompt 9 : Record Start Prompt
5 : Invalid Prompt
To delete announcement, dial the announcement number and #.
Button
Procedure
To change the date format on the LCD,
Press TRANS/PGM button.
Dial * 5
The format toggles between DDMMYY and MMDDYY.
Changing Time/Date Format
To change the time format on the LCD,
Press TRANS/PGM button.
Dial * 6
The format toggles between 12-hour mode and 24-hour mode. (YY : year, MM : month, DD : date)
Button
Procedure
This feature allows the attendant to set the Time/Date without entering Admin Programming.
Attendant Clock Set
Press TRANS/PGM button.
Enter Date as MMDDYY (6 digits) and press HOLD/SAVE button.
Enter Time as military format (4 digits) and press HOLD/SAVE button. If there is no need to change
date or time, press HOLD/SAVE button to go to the next step.