Filter
Top Products
Connection LAN Type Firewall NAT Packet Filter
Without a DHCP server connected
Note : IP address, Subnet Mask and Gateway are assigned by your ISP. If you are using an IP
segment, which is x.x.x.0-x.x.x.255, your settings should be:
IP : one chosen from the range between x.x.x.1 to x.x.x.254
Subnet mask : 255.255.255.0
Gateway : one chosen from the range between x.x.x.1 to x.x.x.254, usually
x.x.x.254, and can't be the same as your IP address.
Remember that Public IP is required.
Internet
Router
General PC 1, 2, ...n
System Setup (Cont'd)
BVP 8882 SIP
BVP 8882 SIP System Setup
Phonebook
Configuration
Password
Bandwidth Setup
Remote Update
System Setup
Server Setup
Network Setup
Terminal Setup
NTP Setup
Service Setup
Connect Type: STATIC
IP address: see note
Subnet Mask: see note
Gateway: see note
PPPoE Username( )
PPPoE Password( )
22