Filter
Top Products
Numeric Keypad
Front view (cont.'d)
1 to 9 keys
In numeric field : only numbers are shown.
In alphanumeric field:
1: display 1 and blank space.
2: display A, B, C, 2 . Push "#" to switch to lower case letters.
3: display D, E, F, 3. Push "#" to switch to lower case letters.
4: display G, H, I, 4 . Push "#" to switch to lower case letters.
5: display J, K and L then 5. Push "#" to switch to lower case letters.
The tactile identifier on this key enables easier key identification on the
keypad for the blind people.
6: display M, N, O, 6. Push "#" to switch to lower case letters.
7: display P, Q, R and S then 7. Push "#" to switch to lower case letters.
8: display T, U, V, 8. Push "#" to switch to lower case letters.
9: display W, X, Y and Z then 9. Push "#" to switch to lower case letters.
"# " key
In numeric field:"#" is shown.
In alphanumeric field: Press "#" to switch between upper and lower case.
letters and secondly between lower case and numbers, and vice versa.
"Maj" indicates the upper case state and "Min" indicates the lower case state.
"*" key
In numeric field: use "." for IP addresses and "*" for phone numbers.
In alphanumeric field: press "*" once to display "*", twice to display "." , and
three times to display ",".
"0" key
In numeric field: "0" is shown.
In alphanumeric field: press "0" once to display "0", twice to display ":", three
times to display ";" and four times to display all available punctuation marks.
Keep pressing "0" and wait for 1.5 seconds for confirmation of desired selection.
The characters are displayed in the following sequence:
"0",":",";","-","+","(",")","!","'",""","@","#","/","_","&","$","~".
BVP 8882 SIP User's Manual 11