Filter
Top Products
6
Introduction
FS500, FS700 & FS1000 Fertilizer Spreaders 309-500M 6/27/08
Land Pride
Table of Contents
Introduction
Owner Assistance
The Warranty Registration card should be filled out by the
dealer at the time of purchase. This information is
necessary to provide you with quality customer service.
If customer service or repair parts are required contact a
Land Pride dealer. A dealer has trained personnel, repair
parts and equipment needed to service the implement.
The parts on your Fertilizer Spreader have been specially
designed and should only be replaced with genuine Land
Pride parts. Therefore, should your Fertilizer Spreader
require replacement parts go to your Land Pride Dealer.
Serial Number Plate
For prompt service always use the serial number and
model number when ordering parts from your Land Pride
dealer. Be sureto include your serial andmodel numbers in
correspondence also. Refer to Figure 1 for the location of
your serial number plate.
Further Assistance
Your dealer wants you to be satisfied with your new
Fertilizer Spreader. If for any reason you do not
understand anypart of this manualor are notsatisfied with
the service received, the following actions are suggested:
2. Discuss the matter with your dealership service
manager making sure he is aware of any problems
you may have and that he has had the opportunity to
assist you.
3. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem and request assistance.
4. For further assistance write to:
Land Pride
Service Department
P.O. Box 5060
Salina, KS 67402-5060
E-mail address
lpservicedept@landpride.com
Serial Number Plate Location
Figure 1
15594
Land Pride welcomes you to the growing family of new
product owners.
This Fertilizer Spreader has been designed with care and
built by skilled workers using quality materials. Proper
assembly, maintenance, and safe operating practices will
help you get years of satisfactory use from this Fertilizer
Spreader.
Application
The Land Pride FS500, FS700, and FS1000 are rotary/
spin type broadcast spreaders designed for Category 1,
three-point hitch mounting. Theyare capable of spreading
seed, sand, salt, top dressings, and prilled/granular
fertilizer, lime, and iron at delivery rates ranging from
43-890 lbs. per acre. Each of these models offers specific
hopper capacities withthe FS500 at 350lbs/5.85cu.ft., the
FS700 at 563lbs/9.38cu. ft., and the FS1000 at 673lbs/
11.22cu. ft. An internally mounted agitator helps keep
material in the hopper from bridging. This ensures a
continuous hopper flow and uniform delivery rate from the
adjustable pattern rotary spreader.
The spread rate capability and range of hopper capacities
make the Land Pride Fertilizer Spreaders well suited for
applications on farms, golf courses, park systems, athletic
fields, and large campuses. They also work well for
smaller municipal or commercial applications of salt and
sand for snow and ice control. See “Features and
Benefits”, “Section 6” for additional information.
Using This Manual
• This Operator’s Manual is designed to help familiarize
you with safety, assembly, operation, adjustments,
troubleshooting, and maintenance. Read this manual
and follow the recommendations to help ensure safe
and efficient operation.
• The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
• To order a new Operator’s or Parts Manual contact your
authorized dealer. Manuals can also be downloaded,
free-of-charge from our website at www.landpride.com
or printed from theLand Pride Service & Support Center
by your dealer.
Terminology
"Right" or "Left" as used in this manual is determined by
facing the direction the machine will operate while in use
unless otherwise stated.
Definitions
NOTE: A special point of information that the operator
must be aware of before continuing.
IMPORTANT: A special point of information related to
its preceding topic. Land Pride’s intention is that this
information should be read and noted before
continuing.