Filter
Top Products
6
7
CONNECTIONS
CONNECTIVITY OPTIONS
An analogue phone line is the pre-programmed option, but it is possible to switch between
and combine two connectivity options.
Press the LINE MODE key.
Use the arrow buttons to select a connectivity option and press OK to
confirm your choice.
Options
Connections: The display screen shows:
• Analogue telephone line ANALOGUE
• GSM/DECT telephone MOBILE
• Computer (VoIP) USB
• Analogue telephone line+computer ANALOGUE+USB
• Mobile/DECT telephone+computer MOBILE+USB
Please turn to page 9 for instructions on using the Konftel 300 with a computer and a
GSM/DECT telephone.
Connection to a PC
You can hold group calls over the Internet using VoIP software (e.g. Skype
®
) with the
Konftel 300. The Konftel 300 acts as a loudspeaker and microphone when making VoIP
calls. In stand-by mode , it can also be used to play audio and music. When the
Konftel 300 is in stand-by mode, the display screen shows that the microphone is turned
off.
ANSWERING CALLS
A ring tone is heard and the blue LEDs start flashing.
Press to answer.
The LEDs show a steady blue light. The duration of the call is shown
on the display screen.
ENDING CALLS
End the call by pressing .
MAKING CALLS
Dial the number.
Press .
The number is called and the LEDs show a steady blue light. The dura-
tion of the call is shown on the display screen.
Or:
Press .
Dial the number.
The number is called and the LEDs show a steady blue light. The dura-
tion of the call is shown on the display screen.
Redialling
Press an arrow button.
The last number that you dialled appears on the display screen.
Use the arrow buttons to look through previously dialled numbers.
Press .
The number you select is dialled.
ANSWERING AND MAKING CALLS