Filter
Top Products
3
Note:
◆
If you do not plan to use the transceiver for a long period,
remove the batteries from the battery case.
◆
This battery case has been designed for transmitting at a
power of approximately 1 W (the low power setting on your
transceiver). If you want to transmit a stronger signal (using
the high power setting on your transceiver), use an optional
rechargeable battery pack
.
1 To open the battery case, press
on the two tabs on the upper
rear of the case, then pull the
two halvs apart.
2
Insert 6 AA (LR6) Alkaline
batteries into the battery case.
• Be sure to match the polarities
with those marked in the bottom
of the battery case.
3 Align the tabs of the cover with
the base, then push down on
the cover until it locks in place
.
Screw the antenna into the
connector on the top of the
transceiver by holding the antenna
at its base and turning
it clockwise until secure.