Kenwood TK-3360 Two-Way Radio User Manual


 
2
1 Match the guides of the
battery pack with the grooves
on the upper rear of the
transceiver, then rmly press
the battery pack in place
.
2
Lock the safety catch to
prevent accidentally releasing
the battery pack
.
3
To remove the battery pack,
lift the safety catch, press the
release latch, then pull the
battery pack away from the
transceiver.
Note:
For battery pack charging procedures and useage, refer to the
battery charger
Instruction Manual.
Before charging a battery pack that is attached to the
transceiver, ensure that the safety catch is rmly closed.

Do not install batteries in a hazardous environment where
sparks could cause an explosion.
Never discard batteries in re; extremely high temperatures can
cause batteries to explode
.
Do not short circuit the battery case terminals.
Do not use rechargeable batteries.


1
3
2