Filter
Top Products
17
PTT ID is the transceiver unique ID code which is sent each
time the PTT switch is pressed and/or released.
If programmed by your dealer for a channel, the compander
will remove excessive noise from transmitted signals, to
provide higher clarity of signals
.
If BCL is set up by your dealer, you will be unable to transmit if
the channel is already in use. Use a different channel or wait
until the channel becomes free
.
When turning on the transceiver power and when changing the
channel, an audio voice will announce the selected channel
and the channel’s V
OX and scrambler settings.
Your dealer may have programmed QT or DQT signaling on
your transceiver channels. A QT tone/ DQT code is a
sub-audible tone/code which allows you to ignore (not hear)
calls from other parties who are using the same channel.
This function is used when a transceiver is stolen or lost.
When the transceiver receives a call containing a stun code,
the transceiver becomes disabled
. The stun code is cancelled
when the transceiver receives a call with a revive code.