Filter
Top Products
15
You can transmit pre-programmed Status messages by
pressing the keys programmed as Status 1 or Status 2.
S
tatus messages are 2-digit codes ranging from 10 to 99
(80 ~
99 are reserved for special messages).
VOX operation allows you to transmit hands-free. This feature
can be activated or deactivated by your dealer.
1 Connect a headset to the transceiver.
2 With the transceiver power of
f, press and hold the Side 1
key for 2 seconds while turning the transceiver power ON.
• The LED ashes red and green.
3 Press the Side 1 key to increase the VOX Gain level, and
the Side 2 key to decrease the level
.
• The VOX Gain can be adjusted from levels 1 to 10 and off.
4 While adjusting the level, speak into the headset
microphone to test the sensitivity level. (Your voice is not
trasmitted during this test procedure.)
• When sound is recognized, the LED lights orange.
5 Press the PTT switch to save the setting.