Filter
Top Products
29
3 In Selcall Mode, press the <B and C> keys, rotate the
selector, or enter an appropriate number using the
DTMF keypad to select the ID of the station you want
to call.
• Alternatively, press and hold the S or key to enter
Manual Dialing mode. Using Manual Dialing, you can
enter digits with the DTMF keypad or selector. When
using the selector, rotate it to select a digit, then press the
C> key to accept the digit. Repeat this process until the
entire ID is entered.
4 Press the S key to enter Status Mode.
5 Press the <B and C> keys, rotate the selector, or enter
an appropriate number using the DTMF keypad to
select the status ID you want to transmit.
• Alternatively, press and hold the S or key to enter
Manual Dialing mode. Using Manual Dialing, you can
enter digits with the DTMF keypad or selector. When
using the selector, rotate it to select a digit, then press the
C> key to accept the digit. Repeat this process until the
entire ID is entered.
6 Press the PTT switch to make the call or the Side 2
key to page the selected recipient.
• Alternatively, press the Call 1 or Call 2 key to transmit
their pre-programmed status messages.
•“ ” appears on the display when the call has
been successfully transmitted.
■ RECEIVING
The icon will flash and a calling ID or text message will
appear when a Status call is received.
Press any key to return to normal operation.