Filter
Top Products
27
FleetSync is an Alphanumeric 2-way Paging Function, and is
a protocol owned by KENWOOD Corporation. FleetSync
enables a variety of paging functions on your transceiver,
some of which depend on dealer programming.
SELCALL (SELECTIVE CALLING)
A Selcall is a voice call to a particular station or to a group of
stations.
■ TRANSMITTING
1 Select your desired zone and channel/ group ID.
2 Press the key programmed as Selcall or
Selcall + Status to enter Selcall Mode.
3 Press the <B and C> keys, rotate the selector, or enter
an appropriate number using the DTMF keypad to
select the ID of the station you want to call.
• Alternatively, press and hold the S or key to enter
Manual Dialing mode. Using Manual Dialing, you can
enter digits with the DTMF keypad or selector. When
using the selector, rotate it to select a digit, then press the
C> key to accept the digit. Repeat this process until the
entire ID is entered.
4 Press the PTT switch to make the call or the Side 2
key to page the selected recipient.
■ RECEIVING
An alert tone will sound, the transceiver will automatically
enter Selcall Mode, and the calling station’s ID will appear
when a Selcall is received.
To respond to the call, press the PTT switch and speak
into the microphone. To simply acknowledge the caller,
press the Side 2 key.
FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION