Filter
Top Products
28
LOW BATTERY WARNING
Low Battery Warning alerts you when the battery needs to be
recharged or replaced. While transmitting or receiving, the
LED will blink red when the battery power is low. If
programmed by your dealer, a tone may also sound.
BUSY CHANNEL LOCKOUT (BCL)
When activated, BCL prevents you from interfering with other
parties who may be using the same channel that you selected.
Pressing the PTT switch while the channel is in use will cause
your transceiver to emit an alert tone and transmission will be
inhibited (you cannot transmit). Release the PTT switch to
stop the tone and return to receive mode.
STUN
When the transceiver receives a call containing a stun code,
either transmit mode will be disabled, or both receive mode
and transmit mode will be disabled. (This function is used
when a transceiver is stolen or lost.) Stun is cancelled when
the transceiver receives a call with a stun reset code.
BEGINNING/ END OF TRANSMISSION (TX) SIGNAL
The Beginning of TX and End of TX identification signals are
used to access and release some repeaters and telephone
systems.
If Beginning of TX is set, the ID signal is transmitted when you
press the PTT switch.
If End of TX is set, the ID signal is transmitted when you
release the PTT switch.
If both are set, the ID signal is transmitted when you press
and release the PTT switch.