Kenwood NX-800 Two-Way Radio User Manual


 
6
Indicator Description
The number of bars indicates the strength of incoming
signals. The antennal plus 3 bars represents a strong
signal while only the antenna represents a weak signal. No
antenna means no signal is present. On NXDN Trunking
channels, the antenna indicator flashes when you are out of
range.
Appears when the Scrambler/ Encryption function is
activated.
Appears when the Auto Recording function on the VGS-1
option is activated.
Appears when the Auto Reply Message is on. (The location
of this icon is the same as the Auto Recording icon.)
Appears when the AUX A function is activated.
Appears when the AUX B function is activated.
reAr pAnel
External
speaker jack
Power input
connector
Antenna connector
Ignition
sense line