Filter
Top Products
26
ADVANCED OPERATIONS
clock
If activated by your dealer, your transceiver can track the time with its built-
in clock. The time will display momentarily when the transceiver power is
turned ON. Additionally, you can view the clock any time by pressing the key
programmed as Clock.
Note: Removing the transceiver power for extended periods will cause the clock time to clear.
■ Clock Adjustment
To set the time:
1 Press the key programmed as Clock Adjustment.
• The current time setting appears.
2 Press the / keys to increase or decrease the year setting.
3 Press the key to set the year and cycle to the month setting.
4 Repeat steps 2 and 3 to set the day, hour, and minute.
5 Press the key to exit Clock Adjustment mode.
• You can press at any time to exit Clock Adjustment mode.
lcd brighTneSS
The LCD backlight can be turned off or set to low or high levels. To cycle through
the brightness settings, press the key programmed as LCD Brightness.
• Each press of LCD Brightness cycles the brightness level from high to low to off, and
then back to high.
horn AlerT
To use the Horn Alert function, your dealer must install an optional unit. When
a call is received that matches the optional signaling set up on your transceiver,
Horn Alert causes the vehicle horn or some other external alert to sound. This
function notifies you of a received call when you are away from your vehicle.
To toggle Horn Alert ON and OFF, press they key programmed as Horn Alert or
access the Horn Alert function through the Menu {page 12}.
• HA momentarily appears on the display when Horn Alert is active.