Filter
Top Products
15
ENGLISH
JABRA FREEWAY
Enable or disable
Voice Guidance and
commands
Press and hold the Voice button while
sliding the Power switch into the On
position. You will hear ”Voice on” when
you enable and ”Voice o” when you
disable the voice features.
Reset to factory
default
Turn on the FREEWAY and press and
hold the Answer/end, Voice and
Mute button together for about 6
seconds. When the FREEWAY is reset
it will automatically go into pairing
mode.
Night driving mode When powered on you can tap the
Vol- and Vol+ simultaneously to
disable the LED’s. And again to enable
them again. The LED’s will be enabled
every time you reconnect or power on
the FREEWAY.
Download Firmware updates and additional languages
Go to jabra.com/freeway and download the latest rmware and
additional languages.
TROUBLESHOOTING & FAQ
I hear crackling noises
- Bluetooth is a radio technology, which means it is sensitive to
objects between the speakerphone and the connected device.
It is designed for the speakerphone and the connected device
to be used within 33 feet (10 meters) of each other, with no
major objects in the way (walls, etc.).
I cannot hear anything in my speakerphone
- Increase the volume in the speakerphone.
-
Ensure that the speakerphone is paired to a device that is playing.
- Make sure your phone is connected to the speakerphone by
tapping the Answer/End button.