Jabra HFS100 Conference Phone User Manual


 
12
ENGLISH
JABRA FREEWAY
The Jabra FREEWAY is loaded with voice announcements that talks
you through setup and daily operation. In the table below you can
see the most common announcements.
Voice guidance
FREEWAY
announcements to you
What it means
“Welcome! You are now
ready for pairing. Go to
the Bluetooth menu on
your phone.
Turn on or enable
Bluetooth.
Search for devices and
select your Jabra hands
free device. Select pair
or OK. If asked for a PIN
code enter 0000”
The FREEWAY is in pairing mode.
Announced automatically when
powered on the rst time and
whenever FREEWAY is put into
pairing mode.
”Pairing failed” Announced if pairing fails
“Connected” Announced when FREEWAY is
connected to a phone
“Two devices connected” Announced when FREEWAY is
connected to two phones/devices
”Disconnected” Announced if a connected phone/
device is turned o, goes out of
range or has BT disabled while in
range and while the speakerphone
is still turned on.
”Battery level is low” Announced when the battery level
goes below 10%
”Voice on/o” Announced when voice guidance
and controls are enabled or disabled
”Call from <name from
phone address book or
number>”*
Announced when there is an
incoming call if your phone/device
supports caller ID (PBAP)
* Phone dependent