Filter
Top Products
22
INT1400 Cordless Telephone User Guide
2. Dial feature code 712. (Display shows ENTER PARK ZONE.)
3. Dial a park zone 1-5. Three beep tones are heard and now the call can be
retrieved from any extension on the system by dialing feature code 712.
NOTE: When a call is parked in any zone, there is no indication in the display.
4.
To retrieve the parked call, press TALK.
5. Dial feature code 712. (Display shows the phone number or extension number
and duration of the call in minutes and seconds.)
Transferring Calls
Note: The following instructions assume you are on a call.
To transfer an existing internal call to an internal number:
1. Press XFER. (Display shows DIAL, OR SELECT EXTN.)
2. Dial the internal extension. A ring tone is heard when the call is answered and
the call counter starts. (Display shows extension number and the duration of the
call in minutes and seconds.)
3. Press TALK to transfer the call or press XFER to return the call.
To transfer a call to an external number:
1. Press XFER. (Display shows DIAL, OR SELECT EXTN.)
2. Dial the external number. When the call is answered, the call counter starts.
(Display shows phone number and the duration of the call in minutes and sec-
onds.)
3. Press TALK to transfer the call or press XFER to return the call.
Muting the Microphone
To mute the microphone so that you can hear the other party, but they cannot
hear you (this does not put them on hold):
Press
MUTE (the TALK icon in the display flashes).
To return to the call:
Press
MUTE.