Filter
Top Products
11
4. HEADSET OPERATION
This telephone can be configured to suit many different headsets - please consult the INSTALLATION section for details to get the best
performance from your headset.
(Warning: Only use NZ Telecom Telepermit Approved headsets with this telephone)
BASIC OPERATION
To receive or make a call using the headset:
(Please ensure that the headset is connected to the telephone correctly and that you are wearing the headset correctly)
● To receive calls simply press the HANDSFREE / HEADSET key and speak into the headset microphone. To hang-up press the
HANDSFREE / HEADSET key again.
● To make calls simply press the HANDSFREE / HEADSET key and you should hear the dial tone. Dial the number you are
calling either using a pre-stored memory key or dial using the keypad. To hang-up press the HANDSFREE / HEADSET key
again.
HANDSFREE / HEADSET AND HANDSET MODES
A call can be switched between the Handsfree / Headset mode and the Handset mode by pressing the HANDSFREE / HEADSET
KEY or by lifting the handset.
The HANDSFREE / HEADSET KEY has auto-detection function. When a headset is correctly connected to the telephone, the
Handsfree function is automatically disabled to allow the HANDSFREE / HEADSET KEY to work in Headset mode. You can unplug
the headset from the telephone to revert back to Handsfree mode (even during a call).
Lifting the handset during headset mode will change to handset mode operation. To revert back to headset mode operation from
handset mode simply press the HANDSFREE / HEADSET KEY and if appropriate replace the handset to the cradle.