Interquartz IQ331 Telephone User Manual


 
6
TONE / PULSE SWITCH
Used to select the dialing mode, either TONE (DTMF) or PULSE (Decadic). The correct
mode depends on the telephone network. If in any doubt, contact your authorised
Interquartz dealer.
RECALL KEY
For use with host telephone systems to invoke special network facilities such as call-
hold or call-transfer available in your system.
For further details please consult your host system manuals or user training service.
Please see the INSTALLATION section for details to adjust the telephone’s Flash time,
to ensure that the key functions correctly.
BASIC OPERATION
This telephone can be used as a normal telephone; lift the HANDSET to answer an
incoming call, or lift the HANDSET and dial on the KEYPAD to commence an outgoing
call. Please refer to the appropriate sections to learn more about advanced operating
instructions.
REDIAL KEY
Press to redial the last manual number previously dialed, which may be up to 32 digits
long. Dialing more than 32 digits during one call will cause erasure of the entire number
from the REDIAL memory.
TO REDIAL LAST NUMBER
1. Lift HANDSET
2. Press REDIAL .