Filter
Top Products
5
Connection
Insert the line cord into the socket. Set the tone/pulse switch ( located in the
base of the telephone, see Figure 2 ) to the appropriate position. If you are
unsure as to whether your exchange is pulse or tone, call your Network
Supplier and they will advise you.
Set the ringer volume and ringer pitch control, as desired.
Setting the clock
The LCD display shows the time of day, in its normal mode ( see telephone
features Section 3 for other functions of the display ).
The time can be set in either a 12 hour or a 24 hour clock. The format is
HH - MM - SS ( H hours, M minutes, S seconds )
To set the time of day :
Push gently on the switch cover plate, located just below the LCD display,
Figure 1, and the cover will rotate to reveal a set of buttons.
Press the STORE button
Press the relevant hour time on the keypad ( HH ) - can be one or two digits
Press the minute time on the keypad ( MM ) - MUST be two digits
Decide on the format and press
0 for 12 hour mode AM setting
1 for 12 hour mode PM setting
2 for 24 hour mode
Press the CLOCK / TIMER button