Filter
Top Products
11
Insignia NS-F1112 Two-Way Radio
www.insignia-products.com
3 Press the PTT button to confirm the selection.
Setting the VOX level
Your radio has 3 VOX level settings: (oF/1/2/3).
To set VOX:
1 Press the Power/Menu button until the display shows VOX
blinking and on the right of the CHANNEL NUMBER display, an
oF icon appears.
2 Select 1, 2, or 3 by pressing the Up or Down buttons, then
pressing the PTT key.
VOX is more sensitive on the 1 setting than on the 3 setting.
To turn VOX off:
1 Press the Power/Menu button until the display shows VOX
blinking and on the right of the CHANNEL NUMBER display, a 1,2
or 3 icon appears.
2 Select oF by pressing the Up or Down button, then pressing the
PTT key.
Adjusting the roger beep tone
Whenever you release the PTT button, a roger beep tone may be
transmitted to let your friends know you are finished talking.
To turn the roger beep tone on:
1 Press Power/Menu button until the rb icon appears on the display.
2 Press the Up or Down button to set the roger beep tone on.
3 Press PTT to save your selection.
To turn the roger beep tone off:
1 Press the Power/Menu button until the display shows the rb icon
blinking, while on the right of the rb, an on icon appears.
2 Select oF by pressing the Up or Down buttons, then pressing the
PTT button.
Notes
When the PTT button is pressed during the low battery level
condition, the TX Power automatically switches from Hi(H)
to Lo(L) level.
You cannot adjust the power setting on the FRS channels
(8~14). They are set to Low power per FCC regulations.
NS-F1112.fm Page 11 Tuesday, September 19, 2006 11:33 AM