Filter
Top Products
10
Insignia NS-F1112 Two-Way Radio
www.insignia-products.com
Changing channels
Your radio has 22 channels available.
To change channels:
1 With the radio on, press the Power/Menu button until the current
channel segment flashes.
2 Use the Up or Down button to change the channel.
3 Press the PTT button to save the new channel.
Setting privacy codes
Your radio has 121 privacy codes available. You can select a different
privacy code for each channel.
To select a privacy code for the current channel:
1 Press the Power/Menu button twice.
2 Press the Up or Down buttons to select one of the 38 CTCSS
privacy codes.
-OR-
Press the Power/Menu button again and the Up or Down button
to select one of the 83 DCS privacy codes. The Privacy Code icon
on the display indicates whether you set your privacy code in
CTCSS or DCS mode.
3 Press the PTT button to confirm the selection.
Selecting the transmit (TX) power level
Your radio has two power level settings.
To select the power level on channels 1~7 and 15~22:
1 Press the Power/Menu button until a Pr icon appears blinking on
the display.
2 Press the Up or Down buttons to select TRANSMIT POWER
LEVEL icon (H: Hi/L: Lo).
Note
If you select any CTCSS privacy code, any pre-selected
DCS privacy code is cancelled and vice-versa. Selecting a
privacy code of oF disables the privacy feature. To
communicate between two radios, all radios in your group
must be set to the same channel and privacy code
selections.
NS-F1112.fm Page 10 Tuesday, September 19, 2006 11:33 AM