Filter
Top Products
12 - 9
Configuring the Dolphin Terminal for Communications
The Dolphin terminal may be configured for communications using the Detectoid Communication Utility as described in Chapter
2 or, manually as described below.
To set Communications Properties:
1. Select Start>ActiveSync>Tools>Options.
2. Select the PC Connection tab.
3. Select the desired option for connecting to the desktop computer. Click OK.
4. Place the Dolphin in the cradle.
5. On the Dolphin 7400/7450 desktop, double-tap on ActiveSync.
6. In the ActiveSync connection settings, add check mark to "Allow serial cable or infrared connection to this COM port" and
Communications Properties