Filter
Top Products
Grandstream Networks, Inc. HT–496 User Manual Page 16 of 33
Firmware 1.0.3.64 Last Updated: 1/2007
FROM THE WAN PORT:
The WAN port HTML configuration option is disabled by default from factory. To access the HTML
configuration menu from the WAN port:
1. Enable the “WAN Port Web Access” option via IVR option 12.
2. Find the WAN IP address of the HT–496using voice prompt menu option 02.
3. Access the HT–496Web Configuration page by the following URI via WAN port:
http://HandyTone-IP-Address
(the HandyTone-IP-Address is the WAN IP address for the HT–496).
NOTE: If using a web browser to enter the configuration page, strip the leading “0”s because the browser
will parse in octet. (i.e. if the IP address is: 192.168.00
1.014, please type in: 192.168.1.14).
E
ND USER CONFIGURATION
Once the HTTP request is entered and sent from a Web browser, the user will see a login screen. There
are two default passwords for the login page:
User Level: Password: Web pages allowed:
End User Level 123 Only Status and Basic Settings
Administrator Level admin Browse all pages
Only an administrator can access the “ADVANCED SETTING” configuration page.
F
IGURE 3: SCREENSHOT OF CONFIGURATION LOG- IN PAGE
NOTE: If you cannot log into the configuration page by using default password, please check with the
VoIP service provider. The service provider may have provisioned and configured the device for you. The
Basic Configuration Page is the first web GUI the user will see.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030