Filter
Top Products
Grandstream Networks, Inc. HT–496 User Manual Page 13 of 33
Firmware 1.0.3.64 Last Updated: 1/2007
Call Features
The HT–496 supports all the traditional and advanced telephony features.
T
ABLE 5: HT–496 Call Feature Definitions
Key Call Features
*23 3-way conference
*30
Block Caller ID (for all subsequent calls)
*31
Send Caller ID (for all subsequent calls)
*50
Disable Call Waiting (for all subsequent calls)
*51
Enable Call Waiting (for all subsequent calls)
*67
Block Caller ID (per call)
*70
Disable Call Waiting (per call)
*71
Enable Call Waiting (per call)
*72
Unconditional Call Forward. Dial “*72”, wait for dial tone. Dial the
forward number and “#” for a dial tone, then hang up.
*73
Cancel Unconditional Call Forward. To cancel “Unconditional Call
Forward”, dial “*73”, wait for dial tone, then hang up.
*82
Send Caller ID (per call)
*87 Blind Transfer
*90
Busy Call Forward. Dial “*90” , wait for dial tone. Then dial the
forward number and “#” for a dial tone, then hang up.
*91
Cancel Busy Call Forward. To cancel “Busy Call Forward”, dial “*91”,
wait for dial tone, then hang up.
*92
Delayed Call Forward. Dial “*92”, wait for dial tone. Then dial the
forward number and “#” for a dial tone, then hang up.
*93
Cancel Delayed Call Forward. To cancel Delayed Call Forward, dial
“*93”, wait for dial tone, then hang up.
Flash/Hook
Toggles between active call and incoming call (call waiting tone). If not
in conversation, flash/hook will switch to a new channel for a new call.
T.38
FAX
HT–496 supports two (2) FAX modes: 1) T.38 (Fax over IP) and 2) fax pass through.
T.38 is the preferred method because it is more reliable and works well in most network conditions.
Please use this method by setting fax mode
to T.38, if the service provider supports T.38.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030