Filter
Top Products
HandyTone-488 User Manual Grandstream Networks, Inc.
17
NAT/DHCP Server Information & Configuration:
Cloned WAN MAC
Addr:
(in hex format)
LAN Subnet Mask:
255.255.255.0
(default is 255.255.255.0)
LAN DHCP Base
I
P:
192.168.2.1
(base IP for the LAN port, default is 192.168.2.1)
DHCP IP Lease
Time:
120
(in units of hours, default is 120 hours or 5 days)
D
M
Z IP:
Port Forwarding:
WAN port
0
LAN IP LAN port
0
Protocol
" UDP Only"
WAN port
0
LAN IP LAN port
0
Protocol
" UDP Only"
WAN port
0
LAN IP LAN port
0
Protocol
" UDP Only"
WAN port
0
LAN IP LAN port
0
Protocol
" UDP Only"
WAN port
0
LAN IP LAN port
0
Protocol
" UDP Only"
WAN port
0
LAN IP LAN port
0
Protocol
" UDP Only"
WAN port
0
LAN IP LAN port
0
Protocol
" UDP Only"
WAN port
0
LAN IP LAN port
0
Protocol
" UDP Only"
Update
All Rights Reserved Grandstream Networks, Inc. 2004
End User
Password
This contains the password to access the Web Configuration Menu.
This field is case sensitive.
IP Address
There are 2 modes under which the HandyTone ATA can operate:
- If DHCP mode is enabled, then all the field values for the Static IP
mode are not used (even though they are still saved in the Flash
memory.) The HandyTone ATA will acquire its IP address from the
first DHCP server it discovers from the LAN it is connected.
To use the PPPoE feature the PPPoE account settings need to be
set. The HandyTone will attempt to establish a PPPoE session if any
of the PPPoE fields is set.
- If Static IP mode is enabled, then the IP address, Subnet Mask,
Default Router IP address, DNS Server 1 (primary), DNS Server 2
(secondary) fields will need to be configured. These fields are reset to
zero by default.