Filter
Top Products
HandyTone-488 User Manual Grandstream Networks, Inc.
15
6 Configuration Guide
6.1 Configuring HandyTone-488 WAN IP through Voice Prompt
6.1.1 DHCP Mode
Follow section 5.1 with voice menu option 01 to enable HandyTone-488 to use DHCP.
6.1.2 STATIC IP Mode
Follow section 5.1 with voice menu option 01 to enable HandyTone-488 to use STATIC IP
mode, then use option 02, 03, 04 to set up HandyTone-488’s IP, Subnet Mask, Gateway
respectively.
6.2 Configuring HandyTone-488 with Web Browser
HandyTone-488 series ATA has an embedded Web server that will respond to HTTP
GET/POST requests. It also has embedded HTML pages that allow users to configure the
HandyTone-488 through a Web browser such as Microsoft’s IE and AOL’s Netscape.
6.2.1 Access the Web Configuration Menu
The HandyTone-488 HTML configuration menu can be accessed via LAN or WAN port:
• From the LAN port use the default LAN gateway IP address:
http://192.168.2.1
• The WAN port HTML configuration option is disabled by default from factory. To
access the HTML configuration menu from the WAN port, first enable the “WAN side
HTTP access” option by accessing the configuration via LAN port. With the WAN side
HTTP access enabled, then get the WAN IP address of the HandyTone-488 through
section 5.1 with menu option 02. The HandyTone-488’s Web Configuration page can
be accessed by the following URI via WAN port:
http://HandyTone-IP-Address,
where the HandyTone-IP-Address is the WAN IP address of the HandyTone-488.
6.2.2 End User Configuration
Once this HTTP request is entered and sent from a Web browser, the HandyTone-488 will
respond with the following login screen: