Filter
Top Products
Grandstream Networks, Inc. Mobotix T24S Door System Configuration Guide For GXV3140 Page 5 of 16
www.grandstream.com Last Update : 01/2012
Figure 3: GXV3140 “provisioned by Mobotix” LCD Idle Screen
5. The T24S Door Station and GXV-3140 phone are now ready.
Here is a summary of the changes made automatically on both the GXV-3140 and T24S Door Station:
SIP server in the T24S is activated automatically.
GXV-3140 IP Video phone and the T24S are configured to use DHCP, and are automatically assigned an IP
address and SIP quick-dial number.
Pushing the bell button located on the camera module (if available) calls all connected GXV-3140 phones (“if they
were connected to the network during the initial Setup”) (This behavior can be reprogrammed using MxEasy).
In order to call from the GXV-3140 to the T24S Door System, you only need to lift the Handset.
DISCOVER/CONFIGURE A GXV-3140 PHONE AUTOMATICALLY WITH AN EXISTING DOOR
SYSTEM
In this section we will describe how to Discover and Configure the phone automatically using the MxEasy software
provided by Mobotix (www.mobotix.com under Support > Software Downloads > MxEasy).
In order to Discover/Configure the phone using MxEasy please proceed as follows:
1. Open MxEasy software Camera Door Station Option, you will now be prompted to the configuration page for
the door bell action :