Filter
Top Products
Grandstream Networks, Inc. Mobotix T24S Door System Configuration Guide For GXV3140 Page 3 of 16
www.grandstream.com Last Update : 01/2012
INTRODUCTION:
This guide has been tested for Grandstream GXV3140 IP Video Phone with firmware version 1.0.7.50 and Mobotix
T24S Door System with MX-V4.1.1.7 (2011-12-15) Software. Be aware that different firmware revisions may have
different web interface formats and functionalities. This guide is applicable to the following Grandstream phone models:
GXV3140.
This guide will cover the 3 possible ways to set up a phone for use with Mobotix T24S.
INITIAL SETUP FOR A NEW “GXV-3140/T24S SYSTEM” DOOR SYSTEM:
This section details how you can configure your GXV-3140 with the Mobotix T24S System automatically. To do so, please
proceed as follows:
1. Unpack the GXV-3140 and attach the handset.
2. Connect the GXV-3140 video phone to the network and to the power. The phone will boot up, and request an IP
address from your DHCP server. Once the phone gets an IP address it will display it as shown below:
Figure 1: GXV3140 LCD Idle Screen