Filter
Top Products
Grandstream Networks, Inc. GXP User Manual Page 29 of 44
Firmware 1.2.5.3 Last Updated: 03/2011
Multi Purpose Key X
These options are used to assign a function to the corresponding multi purpose key.
Options available are:
1. “Speed Dial”.
2. “BLF” (Busy Lamp Field). This option has to be supported
on the PBX and it
indicates the status of the extension. The three possible states are idle
(green), busy (red), ringing (blinking red).
3. “Presence Watcher”. This option has to be supported by a presence server
and it is tied to the “Do not disturb” status of the phone.
4. “Eventlist BLF”. This option is similar to the BLF option but in this case the
PBX collects the information from the phones and sends it out in one single
notify message.
5. “Speed Dial Via Active Account”. This option will act just like speed dial, but
based on the current active account. For instance, if the phone is offhook
and account 4 is active, it will call the configured speed dial number using
account 4.
Each function is connected to one of the accounts and has a target user ID.
Time Zone
This parameter controls the date/time display according to the specified time zone.
LCD Backlight Always
On
Turn on LCD backlight at all times. Default is No. This option applies to GXP-
1200/GXP-2000 only.
Time Display Format
LCD time display in 12 hour or 24 hour format
Date Display Format
Choose one of the following formats:
• Year-Month-Day
• Month-Day-Year
• Day-Month-Year
This option applies to GXP280/GXP285/GXP1200/GXP2000 only.
Display Clock instead of
Date
Choose to display clock or date on LCD. This option applies to GXP-280/GXP-
285/GXP-1200/GXP-2000 only.