Filter
Top Products
Grandstream Networks, Inc. GXP1100/1105 User Manual Page 26 of 29
Firmware version: 1.0.1.80 Last Updated: 07/2011
iLBC Frame Size
iLBC packet frame size. Default is 20ms. For Asterisk PBX, 30ms might be
required.
iLBC Payload Type
Payload type for iLBC. Default value is 97. The valid range is between 96 and 127.
Special Feature
Default is Standard. Choose the selection to meet special requirements from Soft
Switch vendors.
SAVING THE CONFIGURATION CHANGES
After the user makes a change to the configuration, press the “Update” button in the Configuration Menu. We
recommend rebooting or powering cycle the IP phone after saving changes.
R
EBOOTING THE PHONE REMOTELY
Press the “Reboot” button at the bottom of the configuration menu to reboot the phone remotely. The
indicator on the top right corner will first turn orange and then red. Wait until the indicator is off. Then log in
again.