Filter
Top Products
System Settings Directory
The System Settings Directory allows you to view status of—and program options for—
a variety of system settings, including:
▼ Setting the Time of Day
▼ Setting the LCD Contrast
▼ Setting Repetitive Redial Parameters
▼ Selecting and Setting Telephone Number Auto-Formatting
▼ Editing Flash Timing; Restoring Default Flash Timing
▼ Restoring System Factory Default Settings
Entering the System Settings Directory
Press SELECT to view the Main Menu options, scroll ▼ to SYSTEM SETTINGS. Press
SELECT again to enter the System Configuration Directory.
Setting the Time of Day
Upon entering the System Settings Directory, EDITTIME? is displayed. Press SELECT to
edit the time of day.
Enter the correct time hh:mm. After hours and minutes are entered, a prompt will appear
for AM or PM, which can be set by pressing the 1 or 2 keys, respectively. When the
correct time is entered, press SELECT .
Setting LCD Contrast
SoundPoint Pro allows you to control how light or dark the LCD display appears. Enter
the System Settings Directory then scroll ▼ until you see E D I TLCD CONTRAST?A
progressive contrast status bar will show the current contrast setting. Press SELECT .
Use the ▲▼ keys to adjust the LCD contrast to the desired level, then press SELECT .
SoundPoint Pro Desktop Conference Phone Operation
2 –2 1
Enabling orDisabling CallerID for Each Line
While viewing a line settings status, press SELECT to view the line settings options for
that line. Scroll ▼ to EDITCALLER ID? Line 2 of the display will show the current
Caller ID status for that line. Press SELECT again.
Use ▲ ▼ to change Caller ID status. When the desired status displayed press S E L E C T a g a i n .
Editing Line-In-Use Voltage Threshold
While on-hook (hung up) SoundPoint Pro will indicate if another phone, computer, or
Fax machine is using one or both phone lines by lighting the LINE key LED indicators
solid red. Line-in-use detection is accomplished by detecting the voltage on each line,
which changes when a line is in use. Different phone systems may have different line-in-
use voltages. SoundPoint Pro allows you to change the line-in-use voltage threshold to
account for voltage variances by telephone system. If the SoundPoint Pro Console’s line-
in-use indicators are not lighting solid red while a line is being used by another device,
try changing the line-in-use voltage settings until the correct level is achieved.
While viewing a line settings status, press SELECT to view the line settings options for
that line. Scroll ▼ to EDITIN-USE? Line 2 of the display will show the current line-in-
use selection: STANDARD, ALTERNATE A, or ALTERNATE B. Press SELECT again.
Use ▲▼ to scroll through line-in-use status options. When the desired status is displayed
press SELECT again.
Restoring Factory Default Settings forEach Line
All factory default settings can be restored at once for each line. Make sure you wish to
restore ALLfactory settings before proceeding with this feature.
While viewing a line settings status, press SELECT to view the line settings options for
that line. Scroll ▼ to RESTORE DEFAULT LINE SETTINGS? Press SELECT again.
If you are sure you wish to restore all line settings, press SELECT again.
SoundPoint Pro Desktop Conference Phone Operation
2 –2 0