GN Netcom GN 6110 Bluetooth Headset User Manual


 
10
You will need to make 2 calls to adjust the volume match, one using your mobile phone and the other
using the desk telephone.
1. Open the compartment cover on the bottom of the base and locate the
black volume match button [A]
2. Using your mobile telephone, make an initial test call to someone and have
a brief conversation, keeping in mind the volume level of the conversation.
3. Using your desk telephone, make a second test call to the same person.
4. While speaking with your test person, again adjust the black volume match
adjustment button until the volume level of this conversation matches that
of the fi rst mobile phone’s test conversation.
4.2 Wearing and wearing styles
Choosing right or left ear wearing styles
The GN 6110’s headset comes confi gured for wearing on your right
ear.
To change for left ear wearing, use the instructions as follows:
1. Open the headset boom arm.
2. Put the headset’s earhook in its opened position.
3. Gently lift and pull the top of the earhook up from the upper hinge
pin and pull away to remove [A].
4. Turn the headset over [B].
5. Hook the bottom of the earhook on to the lower hinge pin and lift
and pull the top of the earhook over the upper hinge pin [C].
The volume + (up) or volume – (down) buttons will re-orient au-
tomatically.
Placing the headset on your ear [A]
In order to wear the headset follow these instructions:
1. Open the headset boom arm.
2. Put the earhook in its opened position
(90° away from the headset).
3. Loop the earhook behind your ear.
4. Close the headset boom arm towards your ear.
The headset boom arm will then point towards your mouth.
4.3 Setting up your GN 1000 RHL (accessory)
The GN 6110 can be connected to GN Netcom’s GN 1000 Remote Handset Lifter (accessory). This
gives you the additional convenience of answering and ending calls even while away from your
desk.
G
F
E
D
C
B
A
A
A
B
C
GN6110_contents_EU_07-11-03.indd 10 20-11-2003, 14:39:26