Filter
Top Products
7
Turning headset OFF:
Close the headset boom arm. The headset indicator lights for 2 seconds, after which it will turn off.
Making calls:
1. With the boom arm open, press the Multifunc-
tion Button on either the headset [C] or
the base
[B]. An audible tone will be heard and the con-
nection will be established shortly.
2. Lift the telephone’s handset, or press the tele-
phone’s line button if your telephone has one. A
dial tone will be heard.
3. Dial the desired number when the dial tone is
heard in your headset.
The headset indicator and the on-line indicator will fl ash rapidly for the duration of the call.
Answering calls:
1. With the boom arm open, press the Multifunction Button on either the headset or the base. An
audible tone will be heard and the connection will be established shortly.
2. Lift the telephone’s handset, or press the line button if your telephone has one.
The headset indicator and the pairing indicator will fl ash rapidly for the duration of the call.
Ending calls:
1. Press the Multifunction Button on either the base or the headset.
2. Lower the telephone’s handset, or press the line button if your telephone has one.
Headset <-- --> handset switching (while on a call).
To switch from using the headset to the handset during a call:
1. Terminate the link between the headset and the base by either closing the headset boom arm [A]
or pressing the Multifunction Button on the base [B] or the headset [C].
2. The call is now terminated in the headset, and can be continued in the handset.
3. To end the call, hang up the telephone handset.
To switch from using the handset to the headset during a call:
1. With the boom arm open, press the Multifunction Button on either the headset or the base. An
audible tone will be heard and the connection will be established shortly.
2. The call is now terminated in the handset, and can be continued in the headset.
3. To end the call, press the Multifunction Button on either the base or the headset, or close the
headset boom arm.
4. Lower the telephone’s handset. On telephones equipped with a line button, press the line button
to end the call.
5. You may continue wearing the headset, or place it in the base (with the boom arm closed) for
recharging.
B
C
A
GN6110_contents_EU_07-11-03.indd 7 20-11-2003, 14:39:25