Filter
Top Products
7
LCD Display
Battery icon
Phone icon
EXT External call icon
INT Internal call icon
CLI icon
No ring icon
Mute icon
Key lock icon
Aerial icon
▲ / ▼
Up / Down arrow
Voice mail waiting indicator (VMWI icon)
Using the Handset Telephone
Using the telephone
When the handset is inserted in the station charging unit, it
starts to charge automatically. To optimize the battery
performance, charge the handset battery for 14 hours prefer to
first use.
Note: This phone defaults to Tone Dialing. To change Pulse Dialing,
see chapter “Base Station Settings – Changing the Dialing Mode”. If
you don’t know which type of service you have, please check with
the local telephone company.
Selecting the Language
Ten different languages are available for selection for each handset.
In standby mode, press button and “5” key. Current
language is displayed.
Press or as often as necessary to select the required
language.
Press “INT/OK” key to confirm the selection.
Note: The following languages are available:
ENGLISH; DEUTSCH; ITALIANO; FRANCAIS;
ESPANOL; PORTUGUES; NEDERLANDS; POLSKI;
SVENSKA; TURKCE
Making Internal Calls
IMPORTANT: Internal calls can be made only if more than one
handset is registered on the base station.
Press “INT/OK” key.
Press the number of the required handset (1….). Carry out the
conversation.
Press key to end the call.
Note: If an external call is received during an internal call, short
acoustic signals are issued (call waiting).
Making External Calls
Direct dialing
Press key and wait for a dialing tone.
Dial the telephone number and complete the call.