Filter
Top Products
2. CONFIGURING THE BASE'S LINES
You can configure the base's lines according to your requirements.
2.1 LINE PRIORITY
You have the following options for managing the outgoing calls for each hand-
set:
- Alternative (Line 1 or Line 2): default setting
- Line 1 First: line 1 takes priority and if this line is busy, line 2 will be used
- Line 2 First: line 2 takes priority and if this line is busy, line 1 will be used
- Line 1 Only (line 1): line 1 authorized and no access to line 2
- Line 2 Only (line 2): line 2 authorized and no access to line 1
- No Ext (internal calls only)
This line priority has no effects on the reception of incoming calls.
l Press to enter the menu.
l Select "BS Setting" and press to confirm.
l Enter the "MASTER PIN:" 1590 (default) and press to confirm.
l Select "Select Line" and press to confirm.
l Use the direction keys to choose the handset you want from the list and
press to confirm (HS 1 = handset 1).
l Choose the line priority from the 6 options given above and press to
confirm.
2.2 CHOOSING THE RINGING GROUP
Each handset may receive a call on line 1 and/or line 2.
For example, you may decide that handsets 1, 3 and 5 will be associated with
line 1 and ring on line 1 and that handsets 2 and 4 will be associated with line 2
and ring on line 2.
l Press to enter the menu.
l Select "BS Setting" and press to confirm.
l Enter the "MASTER PIN:" 1590 (default) and press to confirm.
8
STD150_AU_Ed01.qxd 26/11/04 12:00 Page 8