GE 25982 Conference Phone User Manual


 
41
 Indicates call or calls have not been reviewed.
 Indicates a new voice mail is available.
 No Caller ID information was received.
 Indicates no call have been received.
 The page on base or format/trans button on cordless
 handset has been pressed.



Indicates the handset needs to be registered before use.
 Indicates the CID number is a Directory Dial Number (DDN) and
cannot be formatted.

Repeat call message. Indicates that a new call from the same
number was received more than once.

Indicates the call is being transferred from one handset to
another or from base to cordless handset.

Indicates the CID or memory contents cannot be dialed.
 Indicates the CID or memory contents cannot be stored.
 Indicates the handset is out of range. Or an additional handset
is in use. Or there has been a base power failure, in which case
you must place all handsets on the main base cradle for 0
seconds to re-establish link with the base.
 The incoming call is from an area not serviced by Caller ID or
 the information was not sent.

Prompt telling you to enter registration mode of handset.


Signal Meaning
A long warbling tone (with ringer on) Signals an incoming call
Three short beeps Page signal
One short beep (every 7 seconds) Low battery warning