GE 25982 Conference Phone User Manual


  Open as PDF
of 100
 
18


1. Press the  button until RINGER 4 1ON or 2OFF shows in the display.
1HI is the default setting.
. Use the  (6 or 5) button or the touch-tone pad on the
handset to scroll to 1ON or 2OFF.
3. Press  to save. You will hear a conrmation tone.
RINGER OFF


You may choose from three different ringer tones.
1. Press the  button on base or  button on handset until SET
RINGER TONE or RINGER TONE shows on the display. The default ringer tone is 1.
. Use the touch-tone pad to select 1, , 3 on base or 0~9 on handset or use the
 (9 or :) button on the base unit or  (6 or 5) button
on the handset to scroll to your selection. The ringer tone plays for few seconds.
3. Press the  button on base or  button on handset again to
store your selection. You will hear a conrmation tone.


This feature allows you to assign a specic ring tone to a number stored in Memory. It
is recommended that you store a Caller ID record into Memory for this purpose.
1. Press the  button until VIP RING TONE shows in the display.
. Press the desired memory location (0 through 9). If there is a number stored in the
selected memory location, VIP RT4DEFAULT shows in the display.
3. Press  (6 or 5) on the handset to select from 1 to 10 or
DEFAULT to use ring tone set in the Ring Tone Menu or SILENT to silence ringer.
4. Press  to save. You will hear a conrmation tone.


 previous next